Home > Main Catalog > Servomotors > HS-75BB Retract Servo

HS-75BB Servo Motor

Servomotor Accessories >>>

Servo Motor Controllers (Manual/PC) >>>

HS-75BB Retract Servo


With its low profile design, strong torque and precision movement the HS-75BB is a great choice to move your retract gear in the realistic manner that you want it to.


 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.45sec/60 degrees at no load
 Operating Speed (6.0V): 0.34sec/60 degrees at no load
 Stall Torque (4.8V): 91.65 oz/in. (6.6kg.cm)
 Stall Torque (6.0V): 113.87 oz/in. (8.2kg.cm)
 Operating Angle: 170 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain (4.8V): 1mA/idle and 150mA no load operating
 Current Drain (6.0V): 1.6mA/idle and 180mA no load operating
 Dead Band Width: 20usec
 Motor Type: 3 Pole Ferrite Motor
 Potentiometer Drive: Indirect Switch Drive
 Bearing Type: Single Ball Bearing
 Gear Type: 1 Metal and 4 POM Resin Gears
 Connector Wire Length: 11.81" (300mm)
 Dimensions: 1.73" x 0.90"x 0.98" (44 x 23 x 25mm)
 Weight: 1.23oz (35g)

Operating Speed: 0.45 / 0.34 sec.
Output Torque: 92 / 114 oz. 6.6 / 8.2 kg.
Size: 1.7"x 0.9"x 1.0" 44 x 23 x 25 mm
Weight:  1.23 oz. 35 g.

HS-75BB - $29.50
Retract Servo

Back to Top