Home > Main Catalog > Servomotors > HS-6965HB Karbonite Digital Speed Servo

HS-6965HB Servo Motor

Servomotor Accessories >>>

Servo Motor Controllers (Manual/PC) >>>

HS-6965HB Karbonite Digital Speed Servo


Part of the new KARBONITE digital servo series, the HS-6965HB is the fastest available. Providing a blinding fast .08 transit speed, this servo is perfect for tail rotor applications Applications: Heli's and Aircraft to 12lbs. Note:Larger aircraft can be flown with Karbonite geared servos if ganged together.


 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Amplifier Type:  Digital Amplifier & Mosfet Driver
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.10sec/60 degrees at no load
 Operating Speed (6.0V): 0.08sec/60 degrees at no load
 Stall Torque (4.8V): 92 oz/in. (6.6kg.cm)
 Stall Torque (6.0V): 111 oz/in. (8.0kg.cm)
 Operating Angle: 40 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain (4.8V): 3mA/idle and 200mA no load operating
 Current Drain (6.0V): 3mA/idle and 240mA no load operating
 Stall Current (4.8V): 2400mA
 Stall Current (6.0V): 3000mA
 Dead Band Width: 2usec
 Motor Type: Coreless Metal Brush
 Potentiometer Drive: 6-Slider, Indirect Drive
 Bearing Type: Dual Ball Bearing
 Gear Type: Karbonite - Heavy Duty Resin
 Connector Wire Length: 11.8" (300mm)
 Connector Wire Gauge:  22AWG
 Connector Wire Strand Count: 60EA
 Dimensions: 1.60" x 0.80"x 1.50" (40 x 20 x 37 mm)
 Weight: 1.83oz (52.1g)

Operating Speed: 0.10 / 0.08 sec.
Output Torque: 92/111 oz. 6.6 / 8.0 kg.
Size: 1.6"x 0.8"x1.5" 40 x 20 x 37 mm
Weight: 1.83 oz. 52 g.

HS-6965HB - $84.95
Karbonite Digital Speed Servo

Back to Top