Home > Main Catalog > Servomotors > HS-635HB High Torque Standard Servo

HS-635HB Servo Motor

Servomotor Accessories >>>

Servo Motor Controllers (Manual/PC) >>>

HS-635HB High Torque Standard Servo


HS-635HB is one of the most durable and reliable servos Hitec has ever offered. Replacing the very popular HS-605BB, the 635HB is a leap forward in technology by utilizing the new revolutionary "Karbonite" gear train. Karbonite is four times stronger than our standard nylon gears and even after hundreds of thousands of cycles it will not show any signs of wear. With a powerful dual ball bearing motor, the HS-635HB offers plenty of torque and speed, and features improved centering and resolution over the 605BB thanks to its' new I.C. So, if you liked the HS-605, you'll love the new HS-635HB. It's the perfect choice for any application where more speed are torque are needed from a standard sized servo. Applications: Sport to high performance aircraft to 12 lbs.


 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.18sec/60 degrees at no load
 Operating Speed (6.0V): 0.15sec/60 degrees at no load
 Stall Torque (4.8V): 69 oz/in. (5.5kg.cm)
 Stall Torque (6.0V): 83 oz/in. (6kg.cm)
 Operating Angle: 45 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain (4.8V): 5.3mA/idle and 400mA no load operating
 Current Drain (6.0V): 6.6mA/idle and 500mA no load operating
 Dead Band Width: 4usec
 Motor Type: 3-Pole Ferrite
 Potentiometer Drive: Indirect Drive
 Bearing Type: Dual Ball Bearing
 Gear Type: Karbonite Gears
 Connector Wire Length: 11.81" (300mm)
 Dimensions: 1.6" x 0.8"x 1.5" (40 x 20 x 39mm)
 Weight: 1.83oz. (52.1g)

Operating Speed: 0.18 / 0.15 sec.
Output Torque: 69/83 oz. 5.5 / 6 kg
Size: 1.6"x 0.8"x 1.5" 41 x 20 x 39 mm
Weight:  1.76 oz. 50 g.

HS-635HB - $29.95
High Torque Standard Servo

Back to Top