Home > Main Catalog > Servomotors > HS-56HB Feather Standard Servo

HS-56HB Servo Motor

Servomotor Accessories >>>

Servo Motor Controllers (Manual/PC) >>>

HS-56HB Feather Standard Servo

  

The Hitec HS-56HB continues the Hitec tradition of affordable performance. Featuring our new revolutionary "Karbonite" gear train. Karbonite is four times stronger than our standard white nylon gears and even after hundreds of thousands of cycles it will not show any signs of wear. Combine that with precision components that have been engineered to provide long lasting trouble free service making the HS-56HB hard to beat! Not only is it the perfect choice for any micro application from indoor R/C and hand launch gliders, to ultra small electric Park and Yard flyers, but it can handle the duties of larger electric 3D aerobatic aicraft as well. Mount it upright or flat; either mounting style is accepted with its unique case design. The new HS-56HB sets a new standard for heavy duty ultra micro servos.

DETAILED SPECIFICATIONS

 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.12sec/60 degrees at no load
 Operating Speed (6.0V): 0.10sec/60 degrees at no load
 Stall Torque (4.8V): 14 oz/in. (1kg.cm)
 Stall Torque (6.0V): 16 oz/in. (1.2kg.cm)
 Operating Angle: 45 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain (4.8V): 5.3mA/idle and 400mA no load operating
 Current Drain (6.0V): 6.6mA/idle and 500mA no load operating
 Dead Band Width: 4usec
 Motor Type: 3-Pole Ferrite
 Potentiometer Drive: Indirect Drive
 Bearing Type: Top Ball Bearing
 Gear Type: Karbonite Gears
 Connector Wire Length: 11.81" (300mm)
 Dimensions: 88" x 0.45"x 94" (23 x 12 x 24mm)
 Weight: .37oz. (10.7g)
 

Operating Speed: 4.8/6.0v : .12 / 0.10 sec.
Output Torque: 4.8/6.0v : 14 / 17 oz 1.0 / 1.2 kg
Size: .9"x .5"x .9" 23 x 12 x 24mm
Weight:  0.37 oz. 10.7 g.

HS-56HB - $24.95
Feather Standard Servo

Back to Top