HS-5475HB Servo Motor

HS-5475HB Digital High Torque Heavy Duty Servo

HS-5475BB kicks off a whole new line of Hitec Programmable Digital servos. Featuring our exclusive heavy duty, Karbonite gear train technology and a programmable digital circuit, the HS-5475 offers high performance programmable performance at a fraction of our competitor's price.

DETAILED SPECIFICATIONS

 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.23sec/60 degrees at no load
 Operating Speed (6.0V): 0.18sec/60 degrees at no load
 Stall Torque (4.8V): 61 oz/in. (4.3kg.cm)
 Stall Torque (6.0V): 76 oz/in. (5.5kg.cm)
 Operating Angle: 45 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain (4.8V): 8mA/idle and 150mA no load operating
 Current Drain (6.0V): 8.8mA/idle and 180mA no load operating
 Dead Band Width: 8usec
 Motor Type: 3 Pole Ferrite Motor
 Potentiometer Drive: Indirect Drive
 Bearing Type: Dual Ball Bearing
 Gear Type: Karbonite
 Connector Wire Length: 11.81" (300mm)
 Dimensions: 1.50" x 0.8"x 1.4" (41 x 20 x 37mm)
 Weight: 1.4oz (39g)
 

Operating Speed: 0.23 / 0.18 sec.
Output Torque: 61 / 76 oz 4.3 / 5.5 kg.
Size: 1.5"x0.8"x 1.4" 39 x 20 x 36mm
Weight:  1.41 oz. 409 g.