HS-525BB Servo Motor

HS-525BB High Speed 5 Pole Motor Servo

The HS-525 features a high performance 5 pole motor attached to a heavy duty gear train. Toss in a ball bearing and oilite bushing supported output shaft and the result is ultra- smooth operation and precise centering. The HS-525BB is offered in both a resin and Alumite (metal) gear versions.

DETAILED SPECIFICATIONS

 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.17sec/60 degrees at no load
 Operating Speed (6.0V): 0.13sec/60 degrees at no load
 Stall Torque (4.8V): 45.82 oz/in. (3.3kg.cm)
 Stall Torque (6.0V): 56.93 oz/in. (4.1kg.cm)
 Operating Angle: 45 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain (4.8V): 8mA/idle and 250mA no load operating
 Current Drain (6.0V): 8.7mA/idle and 280mA no load operating
 Dead Band Width: 6usec
 Motor Type: 5 Pole Ferrite
 Potentiometer Drive: Indirect Drive
 Bearing Type: 1 Ball Bearing and 1 Oilite Bushing
 Gear Type: All Nylon Gears
 Connector Wire Length: 11.81" (300mm)
 Dimensions: 1.56" x 0.77"x 1.41" (39.8 x 19.8 x 36mm)
 Weight: 1.56 oz. (44.5g)
 

Operating Speed: 0.17 / 0.13 sec.
Output Torque: 46 / 57 oz. 3.3 / 4.1 kg.
Size: 1.6 x 0.8 x 1.4" 40 x 20 x 36mm
Weight:  Nylon 1.56 oz. 44.5 g. Metal 1.78 oz. 50.6 g.