Home > Main Catalog > Servomotors > HS-485HB Heavy Duty Ball Bearing Deluxe Servo

HS-485HB Servo Motor

Servomotor Accessories >>>

Servo Motor Controllers (Manual/PC) >>>

HS-485HB Heavy Duty Ball Bearing Deluxe Servo

    

The HS-485HB servo is one of the best deals going. Nearly 84 oz-in. of power for under $18. We use this servo for all types of robotic applications. HS-485HB updates the very popular HS-475HB by adding more torque and greater speed. With a top ball bearing, heavy duty, high impact Karbonite™ gears and high performance circuitry, the HS-485HB offers lots of torque and features excellent centering and resolution.

DETAILED SPECIFICATIONS

 Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.22sec/60° at no load
Operating Speed (6.0V): 0.18sec/60° at no load
Stall Torque (4.8V): 66.6 oz/in. (4.8kg.cm)
Stall Torque (6.0V): 83.3 oz/in. (6.0kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8mA/idle and 150mA no load operating
Current Drain (6.0V): 8.8mA/idle and 180mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Top Ball Bearing, Lower Bushing
Gear Type: Karbonite Gears
Connector Wire Length: 11.81" (300mm)
Dimensions: See Schematic
Weight: 1.59oz (45g)
 

Operating Speed: 0.18/60o at 6.0V at no load
Output Torque: 6kg/cm (83.3 oz/in) at 6.0V
Size: 41 x 20 x 37 mm (1.5 x 0.8 x 1.4 in)
Weight:  45g (1.59 oz)

HS-485HB - $15.95
Heavy Duty Ball Bearing Deluxe Servo

Back to Top