Home > Main Catalog > Servomotors > HS-625MG High Speed Metal Gear Servo

HS-625MG Servo Motor

Servomotor Accessories >>>

Servo Motor Controllers (Manual/PC) >>>

HS-625MG High Speed Metal Gear Servo


The HS-625MG represents a new generation of Hitec servos. Utilizing our unique MP and Alumite gear train technology the HS-625 has our infamous guaranteed to be un-breakable gear train. The powerful HS-625MG is perfect for those high demand applications requiring a standard sized servo.


 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.16sec/60 degrees at no load
 Operating Speed (6.0V): 0.13sec/60 degrees at no load
 Stall Torque (4.8V): 76.37 oz/in. (5.5kg.cm)
 Stall Torque (6.0V): 94.43 oz/in. (6.8kg.cm)
 Operating Angle: 45 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
 Current Drain (6.0V): 9.1mA/idle and 500mA no load operating
 Dead Band Width: 8usec
 Motor Type: 3 Pole Ferrite
 Potentiometer Drive: Indirect Drive
 Bearing Type: Dual Ball Bearing
 Gear Type: 3 Metal Gears and 1 Resin Metal Gear
 Connector Wire Length: 11.81" (300mm)
 Dimensions: 1.59" x 0.77"x 1.48" (40.6 x 19.8 x 37.8mm)
 Weight: 1.94oz. (55.2g)

Operating Speed: 0.18 / 0.15 sec.
Output Torque: 76 / 94 oz. 5.5 / 6.8 kg.
Size: 1.6"x 0.8"x 1.5" 41 x 20 x 38mm
Weight:  1.94 oz. 55.2 g.

HS-625MG - $39.95
High Speed Metal Gear Servo

Back to Top