Images Scientific Instruments Inc. radiation symbol

DIY Steampunk Geiger Counter - Page 7

DIY Build a Steampunk Geiger Counter

Now that you have an idea of bending the lever on the lever switch we can move to the next step. With the plastic saw positioned on the enclosure locate where the hole should go, see figure 13

Hole Position Steampunk Geiger Counter

The hole must be in a position that when the lever comes through the hole and the saw is rotated in a clock wise rotation, the lever is hit with the teeth of the saw which in turn the switch on then off with each tooth. The next steps in the fabrication require a little back and forth assembling, testing, measuring, and fabricating. Remove the saw assembly and drill this hole, see figures 14 and 15.

Back Plate Steampunk Geiger Counter
Front Plate Steampunk Geiger Counter

Buy DIY Steampunk Components Here

Previous Page | Next Page