HSC-5996TG Servo Motor

HSC-5996TG Digital Titanium High Speed Servo

Introducing the latest innovation in servo technology from Hitec; the new HSC-599XTG servos were specifically designed from the ground up for use in high performance vehicles. This new line of servos is the first to offer a Titanium gear train. Yes, I said Titanium!!! Other features include a heavy duty carbon brush coreless motor wrapped in a metal heatsink center case to handle the harshest punishment. We didn't stop there… the case top supports hardened pins with oilite bushings to allow this servo to withstand the all you can throw at it. More features include: 8 O-rings for excellent water and fuel resistance, a short 7" flat heavy duty lead with gold connectors, and our famous M/P (metal/plastic hybrid) first gear that won't strip like all nylon gears, used by our competitors will. Since these servos are digital they offer up to three times the holding torque of analog servos making your vehicle respond quicker to your input and stay where you want them. They truly will change the handling of your vehicle for the better of course!!!

DETAILED SPECIFICATIONS

 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave
 Operating Voltage Range: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C (-68F to +140F)
 Operating Speed (4.8V): 0.13sec/60 degrees at no load
 Operating Speed (6.0V): 0.10sec/60 degrees at no load
 Stall Torque (4.8V): 88.87oz/in. (6.4kg.cm)
 Stall Torque (6.0V): 111.09oz/in. (8.0kg.cm)
 Standing Torque (4.8V): 115.26oz/in. (8.3kg.cm) 5 degree deflection
 Standing Torque (6.0V): 144.42oz/in. (10.4kg.cm) 5 degree deflection
 Operating Angle: 45 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Idle Current Drain (4.8V): 3mA at stop
 Idle Current Drain (6.0V): 3mA at stop
 Current Drain (4.8V): 200mA/idle and 2.0 amps at lock/stall
 Current Drain (6.0V): 240mA/idle and 3.0 amps at lock/stall
 Dead Band Width: 2usec
 Motor Type: Coreless Carbon Brush
 Potentiometer Drive: 6 Slider Indirect Drive
 Bearing Type: Dual Ball Bearing MR106
 Gear Type: 4 Titanium Gears
 Connector Wire Length: 7" (178mm)
 Dimensions: 1.57" x 0.78"x 1.45" (40 x 20 x 37mm) CAD Drawing
 Weight: 2.18oz (62g)
 

Operating Speed: 0.13/0.10 sec.
Output Torque: 89/111 oz. 6/8 kg
Size: 1.6"x0.8"x1.4" 40x20x37 mm
Weight: 2.18 oz. 62 g.