Home > Main Catalog > Servomotors > HS-765HB Sail Arm

HS-765HB Servo Motor

Servomotor Accessories >>>

Servo Motor Controllers (Manual/PC) >>>

HS-765HB Sail Arm


The HS-765HB is deal for applications that call for a small lightweight, high speed, high torque servo. Using state-of-the-art SMT technology, and a custom designed IC the HS-765 series of servos represent a true value with the performance that rivals the others larger more expensive servo. Applications: Sport or high performance Aircraft to 4lbs. Note:While the torque value is very high on this servo, it is still a mini size servo so the gears are not as strong as a standard servo


 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.26sec/60 degrees at no load
 Operating Speed (6.0V): 0.20sec/60 degrees at no load
 Stall Torque (4.8V): 161.09 oz/in. (11.6kg.cm)
 Stall Torque (6.0V): 201.36 oz/in. (14.5kg.cm)
 Operating Angle: 45 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain (4.8V): 8mA/idle and 230mA no load operating
 Current Drain (6.0V): 8.7mA/idle and 285mA no load operating
 Dead Band Width: 8usec
 Motor Type: 3 Pole Ferrite
 Potentiometer Drive: Indirect Drive
 Bearing Type: 1 Bearing and 1 Oilite Bushing
 Gear Type: All Nylon Gear
 Connector Wire Length: 11.81" (300mm)
 Dimensions: 2.33" x 1.14"x 2.05" (59.4 x 29 x 52.2mm)
 Weight: 3.6 oz.. (102g)

Operating Speed: .28 / .23 sec. at 360o
Output Torque: 153 / 183 oz. 11 / 13.2 g.
Size: 2.3"x1.1"x 2.0" 59 x 29 x 50 mm
Weight:  3.88 oz. 110 g.

HS-765HB - $39.95
Sail Arm

Back to Top