HS-6985HB Servo Motor

HS-6985HB Karbonite Digital High Torque Servo

Part of the new KARBONITE digital servo series, the HS-6985HB is the strongest KARBONITE digital servo available. With its 172oz/inches of torque this servo is great for large aircraft with demanding applications. Applications: Sport or high performance Aircraft to 12lbs. Note:Larger aircraft can be flown with Karbonite geared servos if ganged together. Hitec recommends a maximum of 12lbs per servo, per control surface. (I.E. A 24 lb plane should use two servos per surface.)

DETAILED SPECIFICATIONS

 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Amplifier Type:  Digital Amplifier & Mosfet Driver
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.16sec/60 degrees at no load
 Operating Speed (6.0V): 0.13sec/60 degrees at no load
 Stall Torque (4.8V): 144 oz/in. (10.4kg.cm)
 Stall Torque (6.0V): 172 oz/in. (12.4kg.cm)
 Operating Angle: 40 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain (4.8V): 3mA/idle and 200mA no load operating
 Current Drain (6.0V): 3mA/idle and 240mA no load operating
 Stall Current (4.8V): 2400mA
 Stall Current (6.0V): 3000mA
 Dead Band Width: 2usec
 Motor Type: Coreless Metal Brush
 Potentiometer Drive: 6-Slider, Indirect Drive
 Bearing Type: Dual Ball Bearing
 Gear Type: Karbonite - Heavy Duty Resin
 Connector Wire Length: 11.8" (300mm)
 Connector Wire Gauge:  22AWG
 Connector Wire Strand Count: 60EA
 Dimensions: 1.60" x 0.80"x 1.50" (40 x 20 x 37 mm)
 Weight: 1.83oz (52.1g)
 

Operating Speed: 0.16/0.13 sec.
Output Torque: 144/172 oz. 10.4/12.4 kg
Size: 1.6"x0.8"x1.5" 40 x 20 x 37mm
Weight: 1.83 oz. 52 g.