Home > Main Catalog > Servomotors > HS-6635HB Karbonite Digital High Torque Servo

HS-6635HB Servo Motor

Servomotor Accessories >>>

Servo Motor Controllers (Manual/PC) >>>

HS-6635HB Karbonite Digital High Torque Servo

  

The HS-6635HB represents the ultimate compromise between performance and price. If you are looking to get the most out of your next project but don't want to spend a fortune on "High end" servos then the 6635HB is the way to go. These are one of the smoothest servos ever, offering excellent resolution, centering, and holding power that is unsurpassed by any servo in their price range. The Karbonite gears offer greater durability than typical "Plastic" geared servos and can be flown in aircraft up to 72"using one servo per control surface. Applications: Sport or Aerobatic models to 12lbs.

DETAILED SPECIFICATIONS

 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Amplifier Type:  Digital Amplifier & Mosfet Driver
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.18sec/60 degrees at no load
 Operating Speed (6.0V): 0.15sec/60 degrees at no load
 Stall Torque (4.8V): 69.43 oz/in. (5kg.cm)
 Stall Torque (6.0V): 83 oz/in. (6kg.cm)
 Operating Angle: 40 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain (4.8V): 3mA/idle and 400mA no load operating
 Current Drain (6.0V): 3mA/idle and 500mA no load operating
 Stall Current (4.8V): 2000mA
 Stall Current (6.0V): 2500mA
 Dead Band Width: 2usec
 Motor Type: 3-Pole Cored Metal Brush
 Potentiometer Drive: Indirect Drive
 Bearing Type: Dual Ball Bearing
 Gear Type: Karbonite - Heavy Duty Resin
 Connector Wire Length: 11.8" (300mm)
 Connector Wire Gauge:  22AWG
 Connector Wire Strand Count: 60EA
 Dimensions: 1.56" x 0.77"x 1.52" (39.8 x 19.8 x 38.8mm)
 Weight: 1.83oz (52.1g)
 

Operating Speed: 0.18/0.15 sec.
Output Torque: 69/83 oz. 15/6 kg
Size: 1.6"x0.8"x1.5" 40x20x37 mm
Weight: 1.83 oz. 52 g.

HS-6635HB - $47.95
Karbonite Digital High Torque Servo

Back to Top