Home > Main Catalog > Servomotors > HS-5745MG Digital Giant Scale

HS-5745MG Servo Motor

Servomotor Accessories >>>

Servo Motor Controllers (Manual/PC) >>>

HS-5745MG Digital Giant Scale


The HS-5745MG giant scale servo uses Hitec's digital, programmable servo technology to provide tons of torque and holding power for the most demanding applications. Featuring two ball bearings, a custom external motor heat sink, and an unbreakable MP gear gear train, the HS-5745MG is the servo of choice for your next large scale R/C project.


 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Amplifier Type:  Digital Amplifier & Mosfet Driver
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.18sec/60 degrees at no load
 Operating Speed (6.0V): 0.15sec/60 degrees at no load
 Stall Torque (4.8V): 208 oz/in. (15kg.cm)
 Stall Torque (6.0V): 250 oz/in. (18kg.cm)
 Operating Angle: 40 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain (4.8V): 3mA/idle and 700mA no load operating
 Current Drain (6.0V): 3mA/idle and 840mA no load operating
 Stall Current (4.8V): 4000mA
 Stall Current (6.0V): 4800mA
 Dead Band Width: 2usec
 Motor Type: Cored Carbon Brush
 Potentiometer Drive: 6-Slider, Indirect Drive
 Bearing Type: Dual Ball Bearing
 Gear Type: 1 Resin, 3 Metal Gears
 Connector Wire Length: 11.8" (300mm)
 Connector Wire Gauge:  22AWG
 Connector Wire Strand Count: 60EA
 Dimensions: 2.30" x 1.10"x 2.000" (59 x 29 x 52 mm)
 Weight: 5.68oz (161g)

Operating Speed: 0.18 / 0.15 sec.
Output Torque: 208 / 250 oz. 15 / 18 kg.
Size: 2.3"x 1.1"x 2.0" 59 x 29 x 52mm
Weight:  5.68 oz.161 g.

HS-5745MG - $69.95
Digital Giant Scale

Back to Top