Home > Main Catalog > Servomotors > HS-5645MG Digital High Torque Servo

HS-5645MG Servo Motor

Servomotor Accessories >>>

Servo Motor Controllers (Manual/PC) >>>

HS-5645MG Digital High Torque Servo

  

The HS-645MG represents the latest generation of Hitec servos. With a custom designed programmabledigital circuit and our unique Alumite/ MP gear train technology the HS-5645MG has our infamous un-breakable gear train. The powerful HS-5645MG is perfect for those applications that demand a high torque servo.

DETAILED SPECIFICATIONS

 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.18sec/60 degrees at no load
 Operating Speed (6.0V): 0.15sec/60 degrees at no load
 Stall Torque (4.8V): 143oz/in. (10.3kg.cm)
 Stall Torque (6.0V): 168 oz/in. (12.1kg.cm)
 Operating Angle: 45 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
 Current Drain (6.0V): 9.1mA/idle and 500mA no load operating
 Dead Band Width: 8usec
 Motor Type: 3 Pole Ferrite
 Potentiometer Drive: Indirect Drive
 Bearing Type: Dual Ball Bearing
 Gear Type: 3 Metal Gears and 1 Resin Metal Gear
 Connector Wire Length: 11.81" (300mm)
 Dimensions: 1.59" x 0.77"x 1.48" (40.6 x 19.8 x 37.8mm)
 Weight: 2.1oz. (60g)
 

Operating Speed: 0-.18sec/60o at 6.0V
Output Torque: 12.1kg/cm (168 oz/in) at 6.0V
Size: 41 x 20 x 38 mm (1.6 x 0.8 x 1.5 in)
Weight: 60g (2.1 oz)

HS-5645MG - $54.95
Digital High Torque Servo

Back to Top