Home > Main Catalog > Servomotors > HS-50 Super Feather Servo

HS-50 Servo Motor

Servomotor Accessories >>>

Servo Motor Controllers (Manual/PC) >>>

HS-50 Super Feather Servo


The Hitec HS-50 servo is a modern miracle of miniaturization. Featuring precision components that have been engineered to provide long lasting trouble free service. The HS-50 is the perfect choice for any micro application from indoor R/C and hand launch gliders, to ultra small electric Park and Yard flyers, Speed 400 and 1/2A powered aircraft.


 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Operating Voltage: 4.8 Volts
 Operating Temperature Range: -20 to 60 Degree C
 Test Voltage: 4.8 Volts
 Operating Speed: 0.09sec/60 degrees at no load
 Stall Torque: 8.33 oz/in. (0.6kg.cm)
 Operating Angle: 40 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain: 8mA/idle and 100mA no load operating
 Dead Band Width: 8usec
 Motor Type: 3 Pole Ferrite
 Potentiometer Drive: Direct Drive
 Bearing Type: None, outer case serves as bearing
 Gear Type: All Nylon
 Connector Wire Length: 6.29" (160mm)
 Dimensions: 0.82" x 0.44"x 0.86" (20.9 x 11.4 x 22mm)
 Weight: 0.22oz (6.4g) 0.21oz (6.1g) without horn or screw

Operating Speed: 0.09sec/60o at 4.8V
Output Torque: 0.6kg/cm (8.4 oz/in) at 4.8V
Size: 20.9 x 11.4 x 22 mm (0.82 x 0.44 x 0.87 in)
Weight:  5.8g (0.2 oz)

HS-50 - $22.95
Super Feather Servo

Back to Top