Home > Main Catalog > Servomotors > HS-225BB High Performance Mini Servo

HS-225BB Servo Motor

Servomotor Accessories >>>

Servo Motor Controllers (Manual/PC) >>>

HS-225BB High Performance Mini Servo


The HS-225BB is deal for applications that call for a small lightweight, high speed, high torque servo. Using state-of-the-art SMT technology, and a custom designed IC the HS-225 series of servos represent a true value with the performance that rivals the others larger more expensive servo. Applications: Sport or high performance Aircraft to 4lbs. Note:While the torque value is very high on this servo, it is still a mini size servo so the gears are not as strong as a standard servo.


 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.14sec/60 degrees at no load
 Operating Speed (6.0V): 0.11sec/60 degrees at no load
 Stall Torque (4.8V): 54.15 oz/in. (3.9kg.cm)
 Stall Torque (6.0V): 66.65 oz/in. (4.8kg.cm)
 Operating Angle: 45 Deg. one side pulse traveling 400usec
 360 Modifiable: No
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Current Drain (4.8V): 8mA/idle and 300mA no load operating
 Current Drain (6.0V): 8.8mA/idle and 340mA no load operating
 Dead Band Width: 8usec
 Motor Type: 3 Pole Ferrite
 Potentiometer Drive: Indirect Drive
 Bearing Type: 1 Ball Bearing and 1 Oilite Bushing
 Gear Type: Nylon
 Connector Wire Length: 11.81" (300mm)
 Dimensions: 1.27" x 0.66"x 1.22" (32.4 x 16.8 x 31mm)
 Weight: 0.95oz (27g)

Operating Speed: 0.14 / 0.11 sec.
Output Torque: 54 / 67 oz. 3.9 / 4.8 kg.m
Size: 1.3 x 0.7 x 1.3" 32 x 17 x 31 mm
Weight:  Nylon 0.95 oz. 27 g. Metal 1.09 oz. 31 g.

HS-225BB - $20.95
High Performance Mini Servo

Back to Top