This Sanyo NA1S 75.7:1 reduction gear motor is only 29mm (1.14") long (overall), 10mm (0.39") thick, and 12mm (0.47") wide and it's made with metal gears. These gear units are quality built!

These 8.2 gram (0.29oz) motors are rated for 246 RPM, drawing 120mA @ 5V, producing 800gf*cm torque (11 in*oz) and stalling out at 580mA. The 3mm diameter output shaft mates pretty well with any 1/8" hole output device.

Disclaimer: These motors are to be used for Hobby use only and should not be used in applications where motor failure could cause bodily harm or loss of life.

Additional gear box specification see NA1S PDF File (100K)

Includes 2 Metric Screws for Faceplate.

This metric 1.7 (dia) x 0.35 (mm/thd) x 4mm long bolt exactly matches the unique thread on the two bolt-holes on the faceplates of the GM12 series of gear motors.
These screws make it easier to precisely mount your motor to your project!

Item NA1S $24.95

Click on photograph for larger pictures.