Spacer     Images Scientific Instruments Facebook page       Images Scientific Instruments Pinterest page     Sign up for Images Scientific Instruments Newsletter


CDV-715 Retro Digital Geiger Counter : Page 12



Figure 12 Mount and solder LCD to header on ADM pc board.


CDV-715 Retro Digial Geiger Counter

Connecting the ADM to Geiger Counter Board.

The GCK-02 board has a 5V output and ground pad, look back at figure 5. Connect the 9" length of red wire from the Analog Digital meter to the +5V pad on the Geiger counter board. Connect the 9" length of black wire from the Analog Digital meter to the ground pad on the Geiger counter board. Connect the 9" length of white wire from the Analog Digital meter to one of the "D" pads (digital output) on the Geiger counter board, see figure 5. The finished connection between the ADM and GCK-02 is shown in figure 13.

Previous Page                                       Next Page

Back to Top