|
You can make different exciting robots with these servomotor brackets!
Create different robots that use between 3 to 8 servo motor brackets. Servomotors can be controller and programmed using Images Servo Motor Controller boards. They're easy to build, come with default motions, and are fully customizable. Robots you can build can be the snake, the inchworm, the golf bot, the 5legged spider, legged animal, the drawing robot, the chemistry robot, and more! The possibilities are endless -- you can build your own, completely original robot with our easy to use brackets!
|
More on the Servo Motor Brackets
Each aluminum bracket has multiple holes for connecting; plates, holders, servo motor horns as well as holes for connecting
brackets to one another. Each assembly consists
of the following components: two aluminum brackets,
(1) binding head post screw, (4) small sheet metal
screws, (4) 6-32 plastic screws with nuts and
instructions. The SUB-01 Servomotor Bracket assembly
has additional holes in the bottom portion of
the bracket. Fits many HiTec and Futaba servo motors see compatibility chart below.
Compatible with the following HiTec servo motors:
HS-311, HS-322, HS-325, HS-422, HS-425BB, HS-475, HS-525BB, HS-525MG, HS-545BB, HS-625MG, HS-635HB, HS-645MG, HS-925MG,
HS-945MG, HS-5475HB, HS,5625, HS-5925MG, HS-5945MG, HS-5955TG, HSR-5995TG, HSC-5996TG, HSC-5997TG, HSC-5998TG, HS-6635HB,
HS-6965HB, HS-6975HB, HS-6985HB
Compatible with the following Futaba servo motors:
S-148, S-3001, S-3003, S-3004, S-3005, S-3010, S-9001, S-9202, S-9206, S-9402, S-9405
For a complete listing of our available servomotors go to our Servo Motor Page
For manual and Windows PC servo motor controllers
go to our Servo Motor Controller Page
|
