Home > Main Catalog > Servo Motors > HSR-5995TG Digital Titanium Robot Servo

Servo Motor Accessories

Servo Motor Controllers (Manual/PC)

HSR-5995TG Digital Titanium Robot Servo

If your looking for the ultimate hobby robotics servo, you found it. Hitec is proud to announce the amazing HRS-5995TG Digital servo created specifically for the hobby robotics market. Offering a staggering 417oz./in. of torque in a standard size servo case, the HSR-5995TG uses a powerful coreless motor and Hitec's latest geartrain technology, Titanium alloy gears.

Designed to be operated on up to 7.4 volts, and featuring an exclusive "pivot" mount, the Hitec HRS-5995TG servo also rotates 180 degrees compared to the traditional 75 degrees most R/C servos travel. To contain all this brute force, our servo engineers incorporated axial brass bearings into the upper for the new hardened steel gear shafts.

Perhaps the best feature, our HSR-5995TG servo uses Hitec's programmable servo amplifier. This allows the user to program end and center points, dead band width, speed and other functions with Hitec's HFP-10 Servo Programmer.


Operating Speed: 0.15/0.12 sec.
Output Torque: 333/416 oz. 24/30 kg
Size: 1.6"x0.8"x1.5" 40 x 20 x 37mm
Weight:  2.18 oz. 62 g.
DETAILED SPECIFICATIONS
 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3.3-7.4 Volt Peak to Peak Square Wave
 Operating Voltage Range: 4.8-7.4 Volts
 Operating Temperature Range: -20 to +60 Degree C (-68F to +140F)
 Operating Speed (6.0V): 0.15sec/60 degrees at no load
 Operating Speed (7.4V): 0.12sec/60 degrees at no load
 Stall Torque (6.0V): 333.29oz/in. (24kg.cm)
 Stall Torque (7.4V): 416.61oz/in. (30kg.cm)
 Standing Torque (6.0V): 433.27oz/in. (31.2kg.cm) 5 degree deflection
 Standing Torque (7.4V): 541.59oz/in. (39kg.cm) 5 degree deflection
 Operating Angle: 90 Deg. one side pulse traveling 400usec
 360 Modifiable: Yes
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Idle Current Drain (6.0V): 3mA at stop
 Idle Current Drain (7.4V): 3mA at stop
 Current Drain (6.0V): 300mA/idle and 4.2 amps at lock/stall
 Current Drain (7.4V): 380mA/idle and 5.2 amps at lock/stall
 Dead Band Width: 2usec
 Motor Type: Coreless Metal Brush
 Potentiometer Drive: 6 Slider Indirect Drive
 Bearing Type: Dual Ball Bearing MR106
 Gear Type: 4 Titanium Gears
 Connector Wire Length: 11.81" (300mm)
 Dimensions: 1.57" x 0.78"x 1.45" (40 x 20 x 37mm) 
 Weight: 2.18oz (62g)


Item #HSR-5995TG $114.95