|
Home >
Main
Catalog > Servo Motors
> HS-81MG Standard Micro Servo
Servo Motor Accessories
Servo Motor Controllers (Manual/PC)
|
HS-81MG Standard Micro Servo |
 |
 |
The HS-81 and HS-81MG are among Hitec's most popular servos. Available in both resin and metal gear versions. With a fine balance between speed and torque, the HS-81s were designed to be both economical and reliable.
|
Operating Speed: 0.09sec/60° at 4.8V
Output Torque: 0.6kg/cm (8.4 oz/in) at 4.8V
Size: 5.8g (0.2 oz)
Weight: 20.9 x 11.4 x 22 mm (0.82 x 0.44 x 0.87 in)
|
| DETAILED SPECIFICATIONS |
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.11sec/60 degrees at no load
Operating Speed (6.0V): 0.09sec/60 degrees at no load
Stall Torque (4.8V): 36.10 oz/in. (2.6kg.cm)
Stall Torque (6.0V): 41.66 oz/in. (3kg.cm)
Operating Angle: 40 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8.8mA/idle and 220mA no load operating
Current Drain (6.0V): 9.1mA/idle and 280mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Direct Drive
Bearing Type: None, outer case serves as bearing
Gear Type: 4 Metal and 1 Nylon
Connector Wire Length: 6.29" (160mm)
Dimensions: 1.17" x 0.47"x 1.16" (29.8 x 112 x 29.6mm)
Weight: 0.62oz (17g)
|
Item #HS-81MG $23.50 | |
|
|
