|
Home >
Main
Catalog > Servo Motors
> HS-805BB Mega Torque ¼ Scale Servo
Servo Motor Accessories
Servo Motor Controllers (Manual/PC)
|
HS-805BB Mega Torque ¼ Scale Servo |
 |
 |
The HS-805BB is one monster of a servo. The HS-805 uses a heavy duty nylon gear train and a heavy duty 10mm 15 tooth output shaft. The HS-805BB develops enough torque to move just about anything so whether its a large plane orboat, or maybe your just flinging a spike hammer. Whatever it may be the HS-805BB can move it and move it fast.
|
Operating Speed: 0.19 / 0.14 sec.
Output Torque: 275 / 343 oz.19.8 / 24.7 kg.
Size: 2.6"x 1.2"x 2.3" 66 x 30 x 58 mm
Weight: 5.36 oz. 152 g.
|
| DETAILED SPECIFICATIONS |
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.19sec/60 degrees at no load
Operating Speed (6.0V): 0.14sec/60 degrees at no load
Stall Torque (4.8V): 274.96 oz/in. (19.8kg.cm)
Stall Torque (6.0V): 343.01 oz/in. (24.7kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8mA/idle and 700mA no load operating
Current Drain (6.0V): 8.7mA/idle and 830mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: All Heavy Duty Nylon Gears
Connector Wire Length: 11.81" (300mm)
Dimensions: 2.59" x 1.18"x 1.26" (66 x 30 x 57.6mm)
Weight: 5.36 oz. (152g)
|
Item #HS-805BB $36.95 | |
|
|
