|
Home >
Main
Catalog > Servo Motors
> HS-5925MG Digital High Speed Coreless Servo
Servo Motor Accessories
Servo Motor Controllers (Manual/PC)
|
HS-5925MG Digital High Speed Coreless Servo |
 |
 |
This could be the best series of servos ever made. With programmable digital circuitry, coreless motor, and a standard aluminum servo arm. The HS-5925MG high speed digital servo has some very impressive specifications. The high Speed HS-5925MG utilizes a metal gear train with the revolutionary MP gear to provide an unbreakable gear train.
|
Operating Speed: 0.10 / 0.08 sec.
Output Torque: 103 / 128 oz. 7.4 / 9.2 kg.
Size: 1.6"x 0.8"x1.5" 39 x 20 x 38mm
Weight: 1.97 oz. 56 g.
|
| DETAILED SPECIFICATIONS |
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.10sec/60 degrees at no load
Operating Speed (6.0V): 0.08sec/60 degrees at no load
Stall Torque (4.8V): 102.76 oz/in. (7.4kg.cm)
Stall Torque (6.0V): 127.76 oz/in. (9.2kg.cm)
Operating Angle: 40 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 3mA/idle and 190mA no load operating
Current Drain (6.0V): 3mA/idle and 240mA no load operating
Dead Band Width: 1usec
Motor Type: Coreless
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: 3 Metal Gears, 1 Resin Gear
Connector Wire Length: 8.66" (220mm)
Dimensions: 1.55" x 0.78"x 1.48" (39.4 x 20 x 37.8mm)
Weight: 1.97oz (56g)
|
Item #HS-5925MG $89.95 | |
|
|
