Home > Main Catalog > Servo Motors > HS-322HD Standard Heavy Duty Servo

Servo Motor Accessories

Servo Motor Controllers (Manual/PC)

HS-322HD Standard Heavy Duty Servo

The HS-322HD improves on Hitec's Standard Sport Servo by utilizing the new revolutionary "Karbonite" gear train. Karbonite is four times stronger than our standard white nylon gears and even after hundreds of thousands of cycles it will not show any signs of wear. This new gear train coupled with our latest custom IC makes the HS-322HD one tough servo at a price that's tough to beat.
Operating Speed: 0.15 sec/60° at 6.0V
Output Torque: 3.7 kg/cm (51 oz/in) at 6.0V
Size: 43 g (1.5 oz)
Weight:  41 x 20 x 37 mm (1.6 x 0.8 x 1.4 in)
DETAILED SPECIFICATIONS
 Control System: +Pulse Width Control 1500usec Neutral
 Required Pulse: 3-5 Volt Peak to Peak Square Wave
 Operating Voltage: 4.8-6.0 Volts
 Operating Temperature Range: -20 to +60 Degree C
 Operating Speed (4.8V): 0.19sec/60 degrees at no load
 Operating Speed (6.0V): 0.15sec/60 degrees at no load
 Stall Torque (4.8V): 42 oz/in (3.0 kg/cm)
 Stall Torque (6.0V): 51 oz/in (3.7 kg/cm)
 Current Drain (4.8V): 7.4mA/idle and 160mA no load operating
 Current Drain (6.0V): 7.7mA/idle and 180mA no load operating
 Dead Band Width: 5usec
 Operating Angle: 40 Deg. one side pulse traveling 400usec
 Direction: Clockwise/Pulse Traveling 1500 to 1900usec
 Motor Type: Cored Metal Brush
 Potentiometer Drive: 4 Slider/Direct Drive
 Bearing Type: Top/Resin Bushing
 Gear Type: Heavy Duty Resin
 360 Modifiable: Yes
 Connector Wire Length: 11.81" (300mm)
 Dimensions: 1.57" x 0.79"x 1.44" (40 x 20 x 36.5mm)
 Weight: 1.52oz (43g)


Item #HS-322HD $9.95