DIY Steampunk Geiger Counter - Page 6

Our Geiger counters:      Digital Meter     Analog Meter     Analog      DIY Kits

DIY Build a Steampunk Geiger Counter

Figure 10 is a side view showing how the components are put together.

Side View Steampunk Geiger Counter

At this point I attached the brass know using a binding post and screw. I positioned the knob between the large space in the decorative brass gear, see figure 11.

Installed Knob Steampunk Geiger Counter

Next we need to locate the hole where we will be putting the lever switch. We are mounting the lever switch on the bottom of the cover, so it is necessary to bend the lever so it will pass up through a hole from the other side of the case cover, see the following figure 12

Lever Switch Steampunk Geiger Counter

Buy DIY Steampunk Components Here

Previous Page Next Page